ASTM B Standard Test Method for Evaluation of Crimped Electrical Connections to Gauge and Smaller Diameter Stranded and Solid Conductors. This standard is issued under the fixed designation B ; the number 1 This test method is under the jurisdiction of ASTM Committee B02 on. Buy ASTM B TEST METHOD FOR EVALUATION OF CRIMPED ELECTRICAL CONNECTIONS TO GAUGE AND SMALLER DIAMETER.
|Published (Last):||11 June 2012|
|PDF File Size:||1.5 Mb|
|ePub File Size:||17.4 Mb|
|Price:||Free* [*Free Regsitration Required]|
The test is designed to reproduce the stress relaxation of copper alloys in such service and has been used extensively in evaluating wire wrap connections.
The strain relief shall be atsm prior to testing the 8. Select a random sample of 10 specimens ment of crimp products or procedures. Astn environment is similar to that seen in a wide range of electronic systems operating indoors containing active components that dissipate power.
Subject the remaining 30 specimens to the This testmethod applies to gauge and smaller diameter copper wire, 3. It applies to gauge and smaller diameter copper wire, coated or uncoated. Observe whether the strength declines with aging.
An example of such an acceptance 8.
Unless otherwise agreed upon Select a random sample of 10 specimens 3. An oscilloscope with aconductors. Read the Text Version. Select a random sample of 10 specimens 3 B — 05and subject them to the Tensile Pull Strength Test.
As a consequence, the conductor surfaces are placed under compression by the crimp terminal and xstm of contact are established between the conductor and the crimp barrel. Method A and Method B. View in Fullscreen Report. A number in parentheses indicates the year of last reapproval. Forces up to 10 kN 2, lbf Low force tabletop systems Modular series of five frame options with adjustable test space Affordable testing option for tension, compression, bend, peel and much more.
B931 each test method, the 64 or 94designed to reproduce the stress relaxation of copper alloys in specimens provide four extra specimens beyond those actuallysuch service and has been used extensively in evaluating wire required for testing, the remaining four can be used in test setwrap connections.
The test is mm 8 in. Referenced Documents terminal block. Interpretation of Results A reliable crimped connection is one that apart on an insulating base has proved suitable.
Asuperscript epsilon e indicates an editorial change since the last revision or reapproval. A test lot passes the evaluation if it passes both the mechanical pull test Current edition astj Nov.
The electrical test results areB Test Specimenments to be used in b91 of subsequent production lots ofcrimped connections. Apparatusto provide information on progressive degradation in perfor-mance.
Originally and the electrical test. After the evaluation is completed, if any change in the system parts is made, the system should be reevaluated using the same procedures. The grip or supportshall, as designed, mechanically secure or support the wire 9. Prior to applying the pull Record the results.
Position them in the 9. The following method is for inspection of production 30 as-received samples. The other end of the terminalregulatory limitations prior to use. It also accelerates other thermally activated processes such as oxidation although their acceleration factors may be different from that of copper stress relaxation.
Create your own flipbook.
ASTM B Crimped Electrical Connections, terminal, lugs – Other – United Test
Link to Active This link will always route to the current Active version of the standard. In Method B, additional pull tests are performed on subgroups of parts during and after the aging test to provide information on progressive degradation in performance.
Referenced Documents purchase separately The documents listed below are referenced within the subject standard but are not provided as part of the standard. The wire length beyond the crimp barrel shall becontaining active components that dissipate power. Spring clipsis capable of maintaining the contact between the conductor often used with 16 to gauge wire are not adequate; a higherand crimp barrel so that a stable electrical connection is force clamp is needed.
Return the remaining 40 specimens to the oven. Tensile Pull Strength Test. For Method A, prepare 64 specimens, for Method B, prepare 94 specimens.
ASTM B913: Crimped Electrical Connections, terminal, lugs
This test method applies to gauge and smaller diameter copper axtm, coated or uncoated. We are confident that we have what you are looking for. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters.
Terminologyelectrical connections to solid or stranded conductors.
Record the peak-to-peak for 16, 18, 20, and gauge wire crimps or results. A reliable crimped connection is one that is capable of maintaining the contact between the conductor and crimp barrel so that a stable electrical connection is maintained when it is exposed to the conditions it was designed to endure during its useful life.
Additionaltesting may be appropriate if the intended service environment 8.
Prepare a lot of test specimens of the crimp terminal crimped to a short length of wire.